| 品牌： | 日本大金 |
| 包裝： | 25KG/包 |
| 產地： | 日本 |
| 單價： | 260.00元/千克 |
| 發貨期限： | 自買家付款之日起 天內發貨 |
| 所在地： | 直轄市 天津 |
| 有效期至： | 長期有效 |
| 發布時間： | 2023-11-24 14:31 |
| 最后更新： | 2023-11-24 14:31 |
| 瀏覽次數： | 554 |
| 采購咨詢： |
請賣家聯系我
|
Generic Name: 乙烯四氟乙烯共聚物 (ETFE) - 提供方: The Chemours Company
Tefzel ? ETFE HT-2181 is a general-purpose fluoroplastic resin available in translucent, 2.5-mm (0.1-in) pellets. Compared with other grades of Tefzel ? , its most unique features are an intermediate flow rate and a balance of properties that make it suitable for a variety of processes and demanding end uses. Table 1 shows typical property data for Tefzel ? ETFE HT-2181.
Tefzel? HT-2181 and the other Tefzel? fluoropolymers are melt processible, modified copolymers of ethylene and tetrafluoroethylene. They are high-performance resins that can be processed at relatively high rates compared with other fluorocarbon resins. They are mechanically tough and offer an excellent balance of properties.
Tefzel? HT-2181 can perform successfully in applications where other thermoplastics are lacking in mechanical toughness, broad thermal capability, ability to meet difficult environmental conditions, or limited by fabricating problems.
Properly processed products made from neat Tefzel? HT-2181 are inert to most solvents and chemicals, hydrolytically stable, and weather-resistant. The recommended upper service temperature is 155°C (311°F); useful properties are retained at cryogenic ranges. The level and stability of dielectric properties are excellent, and the flame rating is V-0 by the UL94 method. Mechanical properties include outstanding impact strength, cut-through, and abrasion resistance.
Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions.
Typical End Products
Tefzel ? HT-2181 is ideal for many end products, including electrical components, such as sleeving, coil forms, sockets, connectors, and switches; lab ware, such as tubing, valves, containers, and dishes; battery or instrument components that require chemical inertness; chemical service items, such as valve components, seal glands, pipe plugs, and corrugated tubing; and film.
與典型值比較 - Upgrade to compare! 與黃卡比較
單位: SI
總覽
材料狀態
已商用：當前有效
資料 1Technical Datasheet (English)
UL 黃卡 2E5468
搜索 UL 黃卡The Chemours Company
Tefzel?
供貨地區北美洲
拉丁美洲
歐洲
亞太地區
特性Excellent Weather Resistance
共聚物
抗溶劑性
良好的電氣性能
良好抗撞擊性
耐化學品性能，良好
耐磨損性，良好
韌性良好
水解穩定
中等流動性
用途薄膜
電氣/電子應用領域
閥門/閥門部件
管件
開關
連接器
密封件
容器
實驗室器具
外觀半透明
形式粒子
加工方法吹塑成型
擠出
樹脂傳遞成型
壓縮模塑
注射成型
物理性能額定值
單位制
測試方法
密度 / 比重1.70
g/cm3
ASTM D792表觀密度1.30
g/cm3
內部方法熔流率（熔體流動速率） (297°C/5.0 kg)6.0
g/10 min
ASTM D3159吸水率 (24 hr)7.0E-3
%
ASTM D570機械性能額定值
單位制
測試方法
抗張強度 (23°C)41.4
MPa
ASTM D638伸長率 (斷裂, 23°C)300
%
ASTM D638彎曲模量 (23°C)1000
MPa
ASTM D790壓縮強度 (23°C)17.0
MPa
ASTM D695沖擊性能額定值
單位制
測試方法
懸壁梁缺口沖擊強度 (23°C)無斷裂
額定值
單位制
測試方法
肖氏硬度 (邵氏 D)67
額定值
單位制
測試方法
熔融溫度255 到 280
°C
ASTM D3418線形熱膨脹系數 - 流動 (0 到 100°C)1.3E-4
cm/cm/°C
ASTM D696最高使用溫度155
°C
UL 746電氣性能額定值
單位制
測試方法
體積電阻率1.0E+17
ohms·cm
ASTM D257介電強度 (0.250 mm)70
kV/mm
ASTM D149介電常數 (23°C, 1 MHz)2.50 到 2.60
6.0E-3
122
sec
ASTM D495可燃性額定值
單位制
測試方法
UL 阻燃等級V-0
30 到 32
%
ASTM D2863