單價: | 面議 |
發貨期限: | 自買家付款之日起 天內發貨 |
所在地: | 直轄市 北京 |
有效期至: | 長期有效 |
發布時間: | 2023-12-16 03:35 |
最后更新: | 2023-12-16 03:35 |
瀏覽次數: | 136 |
采購咨詢: |
請賣家聯系我
|
本公司是一家集代理、經銷為一體的電力電子半導體銷售和電力電子行業解決方案的產業鏈供應商,銷售國內外知名品牌電力電子半導體器件。韓國LS連接器GB35L-34P-H08-E10000原裝現貨供應,公母座供應,歡迎來電咨詢!
其他型號如下:
GB35L-34P-H08-E10000
GB35L-40P-H08-E10000
GB35L-40S-H08-E10000
GB35L-50P-H08-E10000
GB35L-50S-H08-E10000
GB35R-10P-H08-E10000
GB35R-60P-H08-E10000
GB04P-10P-H08-E5000
GB04P-10S-H08-E5000
GB04P-40P-H08-E5000
GB35R-40S-H08-E10000
GU073-5P-SE-E2000
GB35B-34S-H08-E10000
GB35R-34P-H08-E10000
GB042-60P-H10-E5000
GB042-40P-H10-E5000
GB35R-60S-H08-E10000
GB35R-34S-H08-E10000
GB35L-34S-H08-E10000
GB042-10P-H10-E5000
GB35R-24P-H08-E10000
GB35R-48S-H08-E10000
GB04P-30S-H08-E5000
GB04P-24P-H08-E5000
GB35R-10S-H08-E10000P
GB35R-20P-H08-E10000
GB35R-30P-H08-E10000
GB35R-40P-H08-E10000
GB35R-48P-H08-E10000
GB35R-54P-H08-E10000
GB35R-10S-H08-E10000
GB35R-20S-H08-E10000
GB35R-30S-H08-E10000
GB35R-54S-H08-E10000
GB35K-24P-H08-E5000
GB35K-30P-H08-E5000
GB35K-36P-H08-E5000
GB35K-70P-H08-E5000
GB35K-24S-H08-E5000
GB35K-30S-H08-E5000
GB35K-36S-H08-E5000
GB35K-70S-H08-E5000
GB357-10P-H06-E10000
GB357-16P-H06-E10000
GB357-30P-H06-E10000
GB357-10S-H06-E10000
GB357-16S-H06-E10000
GB357-30S-H06-E10000
GB3-16P-H06-E15000
GB3-34P-H06-E15000
GB3-40P-H06-E15000
GB3-16S-H06-E15000
GB3-34S-H06-E15000
GB3-40S-H06-E15000
產品介紹:
1. ?? (Test) ??? ??? ?? 2 ??? ???. Test is classified two kinds of methods as following.
2,???? (Approval Test) ????? ????? ??? ????? ? ?-1 (?? ?? ? ???)? ?? ? ????? ?? ??? ???? ?? ???? ?????, ??? ?? ?? ?? ? ?? ??. In principle approval test shall be done to confirm whether the products are satisfied with the specification or not before production in accordance with table-1 (Test sequence and sample ), but if necessary, it can be carried out during mass production.
3, ???? (Inspection By Attributes) ????? ?? ?? ? ???? ????, MIL-STD-105 ? ??? ??? ?? ??? ?? ? AQL 1.0%? ????. Inspection by attributes is the test based on MIL-STD-105, which shall be carried out when the products are delivered. On condition that any special significance is not designated, the acceptable level 1.0% shall be guaranteed.
4, ???? (Test Condition) ??? ????? ???? ?? ? ????? ??? ??? ???? ????. Test conditions shall be maintained as following if not specially designated. ?? (Temperature) : 10 ~ 35 ℃ ?? (Humidity) : 40 ~ 90 % RH ?? (Atmospheric Pressure) : 650 ~ 800 mmHg
我們一貫秉持"以信為本,以誠待人,專業專注,科技創新"的經營理念,憑借著快速的反應、過硬的品質、合理的價格及準時的交貨,贏得了客戶的信任,已成為國內多家企業的合作供應商。