PC(聚碳酸酯) 945A/基礎創新塑料（原沙伯基礎）945-701高亮黑色，標準黑無溴 1.5mm VO阻燃945-NC本色，半透明無溴 1.6mm VO阻燃945-116透明無溴 1.7mm VO阻燃945A-116透明無溴 3.0mm VO阻燃945A-701標準黑色無溴 3.1mm VO阻燃945ASR透明無溴 脫模性能良好 3.0mm VO阻燃945AU透明無溴 3.0mm VO阻燃945U不透明無溴 1.5mm VO阻燃SABIC Innovative Plastics Lexan? 953A PCPolycarbonate (PC)SABIC Innovative Plastics (GE Plastics)產品說明：Clear, tints and opaque colors, high viscosity, flame retardant with exceptional surface. UV-stabilized.物性信息：物理性能額定值 (公制)額定值 (英制)測試方法比重1.21 g/cc1.21 g/ccASTM D792密度1.217 g/cc0.04397 lb/in3ASTM D792吸水率0.15 %@Time 86400 sec0.15 %@Time 24.0 hourASTM D570平衡吸濕0.35 %0.35 %ASTM D5700.58 %@Temperature 100 °C0.58 %@Temperature 212 °FASTM D570線性成型收縮率,Flow0.0050 - 0.0070 cm/cm@Thickness 3.20 mm0.0050 - 0.0070 in/in@Thickness 0.126 inSABIC Method熔體流動速率7.0 g/10 min@Load 1.20 kg, Temperature 300 °C7.0 g/10 min@Load 2.65 lb, Temperature 572 °FASTM D1238機械性能額定值 (公制)額定值 (英制)測試方法洛氏硬度（M 級）7070ASTM D785洛氏硬度（R 級）118118ASTM D785抗張強度(斷裂)55.0 MPa7980 psiType I, 50 mm/min; ASTM D638抗張強度(屈服)62.0 MPa8990 psiType I, 50 mm/min; ASTM D638伸長率 (斷裂)90 %90 %Type I, 50 mm/min; ASTM D638屈服伸長率7.0 %7.0 %Type I, 50 mm/min; ASTM D638彎曲強度91.0 MPa13200 psi1.3 mm/min, 50 mm span; ASTM D790彎曲模量2.24 GPa325 ksi1.3 mm/min, 50 mm span; ASTM D790懸壁梁缺口沖擊強度6.40 J/cm12.0 ft-lb/inASTM D256懸壁梁無缺口沖擊強度32.04 J/cm60.02 ft-lb/inASTM D4812拉伸沖擊強度525 kJ/m2250 ft-lb/in2Type S; ASTM D1822落錘總能量169 J125 ft-lbASTM D3029泰伯磨損，毫克/1000次1010CS-17, 1 kg; ASTM D1044電氣性能額定值 (公制)額定值 (英制)測試方法體積電阻率>= 1.00e+17 ohm-cm>= 1.00e+17 ohm-cmASTM D257介電常數2.96@Frequency 1.00e+6 Hz2.96@Frequency 1.00e+6 HzASTM D1503.01@Frequency 50.0 - 60.0 Hz3.01@Frequency 50.0 - 60.0 HzASTM D150介電強度16.7 kV/mm@Thickness 3.20 mm424 kV/in@Thickness 0.126 inin air; ASTM D149耗散因數0.00090@Frequency 50.0 - 60.0 Hz0.00090@Frequency 50.0 - 60.0 HzASTM D1500.010@Frequency 1.00e+6 Hz0.010@Frequency 1.00e+6 HzASTM D150耐電弧性0.00 - 60 sec0.00 - 60 secTungsten; ASTM D495相比耐漏電起痕指數(CTI)VVUL 746A熱絲引燃 (HWI)30 - 60 sec30 - 60 secUL 746A高電弧燃燒，HAI30 - 60 arcs30 - 60 arcsUL 746A高壓電弧跟蹤率，HVTR80.0 - 150 mm/min - 5.91 in/minUL 746A熱性能額定值 (公制)額定值 (英制)測試方法線形熱膨脹系數 - 流動68.4 μm/m-°C@Temperature -40.0 - 95.0 °C38.0 μin/in-°F@Temperature -40.0 - 203 °FASTM E 831導熱系數0.190 W/m-K1.32 BTU-in/hr-ft2-°FASTM C177載荷下熱變形溫度(0.46 MPa)137 °C@Thickness 6.40 mm279 °F@Thickness 0.252 inunannealed; ASTM D648載荷下熱變形溫度(1.8 MPa)132 °C@Thickness 6.40 mm270 °F@Thickness 0.252 inunannealed; ASTM D648維卡軟化溫度151 °C304 °FRate B/50; ASTM D1525UL RTI130 °C266 °FUL 746BUL RTI，機械沖擊120 °C248 °FUL 746BUL RTI，機械無沖擊130 °C266 °FUL 746B可燃性(UL94)V-2@Thickness 1.47 mmV-2@Thickness 0.0579 inUL 94V-0@Thickness 2.99 mmV-0@Thickness 0.118 inUL 94光學性能額定值 (公制)額定值 (英制)測試方法折射率ASTM D542霧度1.0 %@Thickness 2.54 mm1.0 %@Thickness 0.100 inASTM D1003Transmission, Visible85 %85 %2.54 mm; ASTM D1003材料描述測試方法Specific Volume0.83cm^3/gASTM D792UV-light, water exposure/immersionF1UL 746C